AMCA News and Discussions
Re: AMCA News and Discussions
The post/s prior to my mentioning "FBL" were about how much from the LCA can be reused/re-utilized/re-purposed for the AMCA. So, in response to that I mentioned very little.
Coming to your question regarding the LCA, the traditional benefits of a 4th Gen plane: weight, security and maintenance - in that order. I just do not think it will make too much of a diff on the "bandwidth" part of the discussion, but I could be totally wrong.
If you revisit the vid posted by Brar, the lecture (forget by whom) on the F-35, skunk works, etc, in that he mentions two things that have stuck with me: the one pertaining to this discussion is when he mentions how they had to deal with a lag between when the sensor "saw" something and when the pilot "saw" the same thing on his helmet (he talks about the cameras seeing through the floor). This despite a plane with perhaps the largest bandwidth. By the time the "scene" appeared on the visor, the plane had moved substantially - he demos it in the vid, looks very funny.
Think about it. That signal has to move but a few feet or could be yds. And still the pilot, in that short time, faced a false picture. So, potentially, if the pilot was "seeing" an enemy plane right below him (in his visor), in reality that enemy plane could be a Km or more away from that position.
But, there is a lot more to this story. The current networks have built-in authentication, privacy (data meant only for certain people/ranks), healing, etc, etc, etc.
Exciting times.
Coming to your question regarding the LCA, the traditional benefits of a 4th Gen plane: weight, security and maintenance - in that order. I just do not think it will make too much of a diff on the "bandwidth" part of the discussion, but I could be totally wrong.
If you revisit the vid posted by Brar, the lecture (forget by whom) on the F-35, skunk works, etc, in that he mentions two things that have stuck with me: the one pertaining to this discussion is when he mentions how they had to deal with a lag between when the sensor "saw" something and when the pilot "saw" the same thing on his helmet (he talks about the cameras seeing through the floor). This despite a plane with perhaps the largest bandwidth. By the time the "scene" appeared on the visor, the plane had moved substantially - he demos it in the vid, looks very funny.
Think about it. That signal has to move but a few feet or could be yds. And still the pilot, in that short time, faced a false picture. So, potentially, if the pilot was "seeing" an enemy plane right below him (in his visor), in reality that enemy plane could be a Km or more away from that position.
But, there is a lot more to this story. The current networks have built-in authentication, privacy (data meant only for certain people/ranks), healing, etc, etc, etc.
Exciting times.
-
- BRF Oldie
- Posts: 5884
- Joined: 04 Apr 2005 08:17
- Location: Dera Mahab Ali धरा महाबलिस्याः درا مهاب الي
Re: AMCA News and Discussions
NRao, I doubt the statement "they had been working on it for the past 10 years". We would have heard about it if they did.
For further discussion, let us first define FBL first. Let us define that FBL means using photons instead of electrons on board the aircraft.
As I see it, the following will be the migration path for FBL in general
1. Connection chain of Sensor->Computer->Display:This is the most critical area that demand bandwidth. It begins with computer->display. Then move to Sensor->computer.
2. Photonic Sensors: Sensors that deal with photonic phenomena. This is not about 'communication', but the sensing element itself is a piece of glass where light passing through it gets affected. Of course, the communication medium will also be glass here, since 'why not?'
These are the critical areas that copper can't address. The rest, ie instrumentation and actuation need not even migrate, except for the weight saving and EMP immunity. Since those are flight critical, they will stay with good old trusty copper for a very long time.
From the open source info, we can infer that currently item 1 is being addressed. Some action is going on in item 2, but my take is that it is going to take a lot of work to get something of that kind to fly. It is a good thing that even HAL has started looking at it, with the possibility of their own darling Rambha getting a piece of that wardrobe.
Still... AamKa seems to be under tight wraps. Not sure if they are using LCA Mk2/1A as sand box for the technologies, or they are in a different silo isolated from the world. If it is the latter, that is bad because no one can do these things alone.
For further discussion, let us first define FBL first. Let us define that FBL means using photons instead of electrons on board the aircraft.
As I see it, the following will be the migration path for FBL in general
1. Connection chain of Sensor->Computer->Display:This is the most critical area that demand bandwidth. It begins with computer->display. Then move to Sensor->computer.
2. Photonic Sensors: Sensors that deal with photonic phenomena. This is not about 'communication', but the sensing element itself is a piece of glass where light passing through it gets affected. Of course, the communication medium will also be glass here, since 'why not?'
These are the critical areas that copper can't address. The rest, ie instrumentation and actuation need not even migrate, except for the weight saving and EMP immunity. Since those are flight critical, they will stay with good old trusty copper for a very long time.
From the open source info, we can infer that currently item 1 is being addressed. Some action is going on in item 2, but my take is that it is going to take a lot of work to get something of that kind to fly. It is a good thing that even HAL has started looking at it, with the possibility of their own darling Rambha getting a piece of that wardrobe.
Still... AamKa seems to be under tight wraps. Not sure if they are using LCA Mk2/1A as sand box for the technologies, or they are in a different silo isolated from the world. If it is the latter, that is bad because no one can do these things alone.
Re: AMCA News and Discussions
They are only now rushing on the LCA project.
My view is they are trying to get the AMCA going in case the LCA project fails and gets cancelled.
Hence the claim that the AMCA's design is already done and ready to roll - even though there has been zero details revealed on it.
It looks like the AMCA project is being rushed through to keep the existing LCA design team employed in case the IAF shuts down the LCA project due to extreme delays.
They have just one last chance to deliver on the LCA after years of poor project management and numerous missed deadlines.
One of many reasons defense R&D should not be in the govt but rather the private sector.
My view is they are trying to get the AMCA going in case the LCA project fails and gets cancelled.
Hence the claim that the AMCA's design is already done and ready to roll - even though there has been zero details revealed on it.
It looks like the AMCA project is being rushed through to keep the existing LCA design team employed in case the IAF shuts down the LCA project due to extreme delays.
They have just one last chance to deliver on the LCA after years of poor project management and numerous missed deadlines.
One of many reasons defense R&D should not be in the govt but rather the private sector.
Re: AMCA News and Discussions
Private sector ... the savior of all things
Re: AMCA News and Discussions
Dileep,
Do not have much for you now. So here is what I have for teh time being. The most appropriate for this topic. There are earlier reports that I need to dig up.
Also, Dr. A. K. Ghosh, the head of the AMCA project, is camera shy. So, yes, besides other reason, he is - per reports - very reluctant to say anything to anyone, just by nature.
Nov, 2010 :: EXCLUSIVE: Official Wishlist of Evolutionary Technologies for India’s 5thGen AMCA
Do not have much for you now. So here is what I have for teh time being. The most appropriate for this topic. There are earlier reports that I need to dig up.
Also, Dr. A. K. Ghosh, the head of the AMCA project, is camera shy. So, yes, besides other reason, he is - per reports - very reluctant to say anything to anyone, just by nature.
Nov, 2010 :: EXCLUSIVE: Official Wishlist of Evolutionary Technologies for India’s 5thGen AMCA
The envisaged changes begin at the very basic — system architecture — and look towards a triplex fly-by-light electro-optic architecture with fiber optic links for signal and data communications, unlike the electric links on the Tejas platform. And unlike centralized architecture on the Tejas, the AMCA proposes to sport a distributed architecture with smart sub-systems. Similarly, unlike the LCA’s centralised digital flight control computer (DFCC), the AMCA could have a distributed system with smart remote units for data communication with sensors and actuators, a system that will necessitate much faster on-board processors.
Next come sensors. The mechanical gyros and accelerometers on the Tejas will need to evolve on the AMCA into fiber optic gyros, ring laser gyros and MEMS gyros. The pressure probes and vanes that make up the air-data sensors will evolve into an optical and flush air data system, and position sensors will be linear/rotary optical encoders. Significantly, actuators — currently electro-hydraulic/direct drive — could be electro-hydrostatic to accrue substantive weight savings on the AMCA. Sensor fusion for an overarching situation picture goes without saying.
The AMCA could feature highly evolved integrated control laws for flight, propulsion, braking, nose wheel steer and fuel management and adaptive neural networks for fault detection, identification and control law reconfiguration.
I’m leaving out stealth from this piece, as I already covered it here in June, including internal weapons bays. And I’ve reported on the AMCA radar here.
Unlike the Tejas, which features an avionics systems architecture based on functionality-based individual computer systems connected on MIL-STD-1553B buses and RS 422 links, the AMCA’s avionics systems architecture will feature a central computational system connected internally and externally on an optic fiber channel by means of multiport connectivity switching modules. In such a system, functionality will be mapped on resourcred optimally and reallocated when faults occur. At least, that’s the idea. Data communications on the AMCA’s processing modules will be through a high-speed fiber channel bus, IEEE-1394B-STD. The connectivities will be switched by means of a multiport switching matrix, with data speeds of 400MB/second.
-
- BRF Oldie
- Posts: 5884
- Joined: 04 Apr 2005 08:17
- Location: Dera Mahab Ali धरा महाबलिस्याः درا مهاب الي
Re: AMCA News and Discussions
IEEE-1394B-STD? Isn't that firewire 800MB/s? Interesting...
Re: AMCA News and Discussions
BTW, if that is not enough Oct, 2008 :: The FGFA conundrum explained
The quadruplex fly-by-light flight control system (yes, the IAF has insisted on it, while the Russian version of the MFS/FGFA will use fly-by-wire flight controls) will be jointly developed by the DRDO and Embraer, while potential suppliers of active phased-array radars include THALES of France, Israel Aerospace Industries, Phazotron JSC, Ericsson Microwave Systems, and EADS.
Re: AMCA News and Discussions
Yeah, used on f35.Dileep wrote:IEEE-1394B-STD? Isn't that firewire 800MB/s? Interesting...
Nrao,
There is no requirement of having FBL to get on 1394B. Both 1394B and 1553 can co exist together. Regular tested FBW can live on the Mil1553 or Mil 1773 or Mil E1553B. High bandwidth stuff can live off the other bus.
It really makes no difference if FBW or FBL is used. The CLAW rules will remain same. The processor and other stuff won't be markedly different.
Most of 1394B is copper. I have searched and have not found any indication that they are using the optical 1394B. All documentation seems to point to copper.
-
- BRF Oldie
- Posts: 5884
- Joined: 04 Apr 2005 08:17
- Location: Dera Mahab Ali धरा महाबलिस्याः درا مهاب الي
Re: AMCA News and Discussions
1394B have fiber PHY defined, upto 3.2 Gbps. Not sure if F-35 uses that option. As I can gather, F-35 uses copper based 400Mbps links.
I haven't heard anything about the use of 1394 in xCA programme anywhere. Is that a real choice, or just an option sometimes considered.
I haven't heard anything about the use of 1394 in xCA programme anywhere. Is that a real choice, or just an option sometimes considered.
-
- BRF Oldie
- Posts: 5884
- Joined: 04 Apr 2005 08:17
- Location: Dera Mahab Ali धरा महाबलिस्याः درا مهاب الي
Re: AMCA News and Discussions
Cybaru, you are focusing only the "fly" part, ie the flight computer getting inputs and generating control outputs. That will essentially remain the same, whether the information comes over glass or copper. It is the 'fight' part that will have major change, because of the additional bandwidth and sensor possibilities.
Re: AMCA News and Discussions
The flight part will change because of underlying physical layer will permit such a change and that wouldn't have been possible on copper? Can you explain further?Dileep wrote:Cybaru, you are focusing only the "fly" part, ie the flight computer getting inputs and generating control outputs. That will essentially remain the same, whether the information comes over glass or copper. It is the 'fight' part that will have major change, because of the additional bandwidth and sensor possibilities.
Re: AMCA News and Discussions
40 to 200Gbs capability available over fiber, infiniband.
10GB ethernet available over copper and fiber for a long time.
40Gb ethernet available now. mostly over fiber.
The problem was not the bandwidth over wire/fiber, but the actual transmit and receive module capability.
10GB ethernet available over copper and fiber for a long time.
40Gb ethernet available now. mostly over fiber.
The problem was not the bandwidth over wire/fiber, but the actual transmit and receive module capability.
Last edited by ragupta on 06 Mar 2017 22:47, edited 1 time in total.
-
- BRF Oldie
- Posts: 5884
- Joined: 04 Apr 2005 08:17
- Location: Dera Mahab Ali धरा महाबलिस्याः درا مهاب الي
Re: AMCA News and Discussions
Will give you an example. If you want to fuse FLIR, FCR and SAR together on the same HUD, while marking out your bomb target as well as the four Thandaars trying to buzz you at the same time, you need fiber.Cybaru wrote:The flight part will change because of underlying physical layer will permit such a change and that wouldn't have been possible on copper? Can you explain further?Dileep wrote:Cybaru, you are focusing only the "fly" part, ie the flight computer getting inputs and generating control outputs. That will essentially remain the same, whether the information comes over glass or copper. It is the 'fight' part that will have major change, because of the additional bandwidth and sensor possibilities.
Re: AMCA News and Discussions
There are atleast two variants of 40gbps over copper twisted pair and one for 25gbps good for tens of meters. Copper is not limiting factor in a small distance like a plane.
Re: AMCA News and Discussions
The AMCA video at AI had a shot of the plane having fibre backbone I think.
Re: AMCA News and Discussions
While puttering around the web, came across the following:
Cons for a wire (in order of concern):
* Arcing and tracking arcs
* Flammability
* Toxicity
* Smoke
* wire-frame aberasion
* cut-thru at rated temp (????)
* wire-wire aberasion
Cons for a wire (in order of concern):
* Arcing and tracking arcs
* Flammability
* Toxicity
* Smoke
* wire-frame aberasion
* cut-thru at rated temp (????)
* wire-wire aberasion
-
- BRF Oldie
- Posts: 5884
- Joined: 04 Apr 2005 08:17
- Location: Dera Mahab Ali धरा महाबलिस्याः درا مهاب الي
Re: AMCA News and Discussions
Problems with high speed copper:Singha wrote:There are atleast two variants of 40gbps over copper twisted pair and one for 25gbps good for tens of meters. Copper is not limiting factor in a small distance like a plane.
1. Needs 8 'thick' and 'heavy' conductors (compared to a thin strand of glass)
2. Sensitive to noise and interference, ie high BER.
3. More complex electronics == less reliability.
4. Tough to get IP Blocks (because of the unbelievably complex modulation schemes. Fiber is still on/off keying at all data rates). Use of COTS chipsets is a problem, since need to support very long term.
Re: AMCA News and Discussions
There are really good articles on wired solutions, over the years, in aviation. One claims that the DC-10 had 485 kgs of material just to prevent damage to the harnesses!! That is in addition to the weight of the wires itself. I am still trying to get info on what "wire" would contribute to the weight of a F-16 (as an example).
On the flip side, I have come across a couple of test articles, one business jet and the Japanese X-2 test plane that have used light/optics in actual flight. No idea why it is so low.
But, going forward, the demand for more bandwidth will only grow. Fusion by itself will place a huge demand on the network.
On the flip side, I have come across a couple of test articles, one business jet and the Japanese X-2 test plane that have used light/optics in actual flight. No idea why it is so low.
But, going forward, the demand for more bandwidth will only grow. Fusion by itself will place a huge demand on the network.
Re: AMCA News and Discussions
I think copper 40gbps is being pushed as a cheap datacenter tech ie lakhs of ports scale as it saves the cost of optical modules at both ends. I heard at 100gbps a significant fraction of cost on a switch or router is the optical modules which is eaten by those oem . So certain sections in netz are pushing to self develop the next gen of optics rather than give money away in tough times and hv less control on i.p
For aircraft the cost issue is not relevant.
For aircraft the cost issue is not relevant.
Re: AMCA News and Discussions
I was expecting a July start date, but ...............not complaining:
AWST, subscription article.
India’s AMCA Fighter To Enter Preliminary Design
AWST, subscription article.
India’s AMCA Fighter To Enter Preliminary Design
Nice!!!Preliminary design of India’s proposed Advanced Medium Combat Aircraft (AMCA) will begin in March, with a target of flying the aircraft in 2024 and making it ready for service as early as 2030. As the defense ministry’s Aeronautical Development Agency (ADA) awaits approval for full-scale development, an upgraded version of the General Electric F414 powerplant has become the likely choice for the twin-engine indigenous fighter. “We have completed the configurations and the ...
Re: AMCA News and Discussions
Aeromag,
Page 45:
Page 45:
Like I have stated, the AMCA is a rather mature project - already.Could you talk about NAL’s role
in Advanced Medium Combat
Aircraft programme of ADA?
CSIR-NAL has contributed to AMCA
programme of ADA in the areas of
structural airframe design and analysis,
developing a low RCS full scale 8.3m
serpentine CFRP air intake duct,
preliminary design of main landing gear
(MLG) and a basic flight simulator for
AMCA with flight controller, subsystems
and sensor models. The expertise of
the laboratory will be fully provided for
futures requirement of the Programme.
Re: AMCA News and Discussions
The same Aeromag issue has a good interview with ADA Chief Cmdr (retd.) Balaji. I really hope that he gets an extension and is able to see the LCA Mk2 programs for the IAF and IN to fruition.
In the interview, he makes a clear comparison between the LCA and JF-17 and states that -
In the interview, he makes a clear comparison between the LCA and JF-17 and states that -
also this"Tejas is intended to replace ageing fleet of MIG-21 aircraft of IAF. It may be mentioned that the aircraft is far superior to MiG-21 in all aspects. Further, it is far ahead in terms of technologies and performance when compared to JF-17 and at par with Gripen.
Regarding production ratesAnd Tejas EW suite has been evaluated in realistic conditions at the Electronic warfare range. With FOC features of Air to Air refuelling, Beyond Visual
Range (BVR) missiles and Close Combat Missile (CCM) integrated, Gun, Carefree manoeuvring, etc., Tejas is expected to be a true Air superiority and Air defence weapon of war, light, agile and manoeuvrable.
on the Naval LCAHAL has drawn the following likely delivery schedules for 20 aircraft in LCA AF Mk1 (IOC) configuration, 20 aircraft in LCA AF Mk1 (FOC) configuration and 83 aircraft in LCA AF Mk-1A configuration. Production Schedule is like this: 20 aircraft IOC Standard & 4 aircraft FOC Standard are
targeted to be delivered by 2018-2019 at the production rate of eight aircraft in an year in 2017-18 and 12 aircraft in an year in 2018-19.
Remaining 16 FOC Standard aircraft are targeted to be delivered by 2019-2020. 83 LCA AF Mk1A standard Production will commence from 2020-21 with a Production Rate of 16 aircraft in a year.
on the Kaveri integration and flight testingLCA Navy Mk1 demonstrated following Naval Specific and other Technologies:
a. Supersonic Flight achieved on both LCA Navy Mk1 aircraft
b. Maiden Ski-Jump was successfully demonstrated by LCA Navy Trainer (NP1) followed by 12 Ski-Jumps with R73 missiles and Night Ski Jump
c. Hot refuelling is demonstrated and a record flying of 3 hour duration had been achieved in one sortie
d. In-Flight Jettisoning has been demonstrated
e. Preparations towards Arrester Recovery are in process.
f. Weapon & Sensor testing has been initiated
A Naval standard Structural Test Specimen (STS) has been built and integrated with the Main Airframe Structural Test (MAST) rig. Testing towards clearance for Carrier Compatibility Tests (CCT) on aircraft has been completed.
There is a discussion to integrate and flight test an improved version of the Kaveri engine in one of the LCA prototypes. Towards this, a study has been initiated to check the various interfaces like structural, systems, software, etc., When the engine is made available, integration will be carried out for testing.
Last edited by Kartik on 09 Mar 2017 02:30, edited 1 time in total.
Re: AMCA News and Discussions
Thanks for posting the relevant bits Kartik.
Re: AMCA News and Discussions
Wonder how many km it covered in that 3 hour sortie?Kartik wrote:...
on the Naval LCA
...LCA Navy Mk1 demonstrated following Naval Specific and other Technologies:
...
c. Hot refuelling is demonstrated and a record flying of 3 hour duration had been achieved in one sortie
...
-
- BRFite
- Posts: 520
- Joined: 15 Aug 2016 01:21
Re: AMCA News and Discussions
http://timesofindia.indiatimes.com/indi ... 546519.cms
NEW DELHI: India will go in for the multi-billion dollar joint development and production of a fifth-generation fighter aircraft (FGFA) with Russia only if there is full-scale transfer of technology as well as "benefits" for the indigenous effort to build a futuristic stealth fighter.
Defence ministry sources say this decision has been taken at the "highest levels" in order to "not repeat the mistakes" of the entire Sukhoi-30MKI jet acquisition programme from Russia, which cost India Rs 55,717 crore without any tangible help in developing indigenous fighter-manufacturing capabilities.
"Though bulk of the 272 Sukhois (240 inducted till now) contracted from Russia have been made by Hindustan Aeronautics (HAL), they have been basically assembled here with imported knocked-down kits. HAL still cannot manufacture the Sukhois on its own," said a source. A HAL-made Sukhoi (around Rs 450 crore) also costs Rs 100 crore more than the price of the same jet imported from Russia.
So, despite Russian pressure to ink the long-pending final R&D contract for the FGFA, India now wants to know whether it will get good value for the estimated $25 billion it will spend to induct 127 of these single-seat jets. The two countries, incidentally, had inked the FGFA inter-governmental agreement way back in 2007, which was followed by a $295 million preliminary design contract in 2010 before the negotiations stalled.
India has now laid down two essential prerequisites for the FGFA project, apart from examining its entire cost-effectiveness. One, there should be extensive technology transfer, including the "source codes", to ensure India can in the future upgrade the fighter with integration of new weapons on its own. Two, it should directly help the indigenous FGFA project called the advanced medium combat aircraft (AMCA), the preliminary design work for which is now under way, as was earlier reported by TOI.
"This is mandatory. A high-level committee headed by an Air Marshal from IAF, which includes an IIT Kanpur professor and former chiefs of HAL and National Aerospace Laboratories,[Is it Prodyut? Who was asking for him to be included] is examining all these aspects. The government will take a call after the report is submitted in April," said the source.
Re: AMCA News and Discussions
^^^So, finally GOI is looking at FGFA as a holistic project. And not simply as another 'screwdriver' project for HAL. It is absolutely ridiculous that a country is looking to develop AMCA but the R&D establishment has no say or stake in a project like FGFA. Which is being led by the country's sole a/c manufacturer. It is exactly such fragmented nature of deal making which has hurt us in the past. In terms of money, exactness of contracts and leveraging them for genuine technology transfer.
Re: AMCA News and Discussions
India needs to produce 300-500 LCA Mk1/1A/2 variants. Stay the course, invest brains and money in kaveri and cross the final tech barrier and produce the AMCA. No point in saving Russian industry through the Pak-FA waste.
Re: AMCA News and Discussions
I doubt Russia will give India that much. This is a dead-end as far as I see it. Five-years from now, India will still be negotiating with Russia on its work share and ToT.
-
- BRFite
- Posts: 1019
- Joined: 28 Oct 2016 13:08
Re: AMCA News and Discussions
This is incorrect. Projecting final result on HUD has nothing whatsoever to do with the BW of the fiber. HUD screen size and frame rates determine how quickly the graphics get updated on any screen. Even then the graphics on HUD is kept to a minimum with minimum required change in information so as not to make the pilot dizzy with information. Fiber BW is needed only to move data around from sensors to CPU and higher the BW the better. But after all the clutter is processed and there is something to display then that info only is sent to the display memory which is read out at pixel clock, and for an HUD that clock speed is around 40MHz.Dileep wrote:Will give you an example. If you want to fuse FLIR, FCR and SAR together on the same HUD, while marking out your bomb target as well as the four Thandaars trying to buzz you at the same time, you need fiber.Cybaru wrote:
The flight part will change because of underlying physical layer will permit such a change and that wouldn't have been possible on copper? Can you explain further?
And ever increasing BW is needed because the seeker/sensor (the analogue part) is now integrated with higher precision ADCs. I used to design 6-bit ADC for an FLIR and was considered adequate, now that part alone is quantized at 24-bits, resulting in 4x BW requirement on sensor to CPU bus.
-
- BRF Oldie
- Posts: 5884
- Joined: 04 Apr 2005 08:17
- Location: Dera Mahab Ali धरा महाबलिस्याः درا مهاب الي
Re: AMCA News and Discussions
RV, all I can say here is, you can't do without fiber the way things are being planned. So, fiber is going to be there in all xCA platforms.
Now, can't one architect a system using copper? Sure!! Only problem will be the extra weight and a bit less reliability.
Now, can't one architect a system using copper? Sure!! Only problem will be the extra weight and a bit less reliability.
Re: AMCA News and Discussions
Data point:
GE's Pearson at AI 17.
https://youtu.be/cMz7QdNK75c?t=4490
Mentions and shows a slide on GE F414 for AMCA.
As I had speculated GE Bangaluru design division, the Welch Center, is spear heading this effort to uprate the F414 by 10%. This arrangement should meet the DTTI requirements. Pearson, in his talk, does mention DTTI.
GE's Pearson at AI 17.
https://youtu.be/cMz7QdNK75c?t=4490
Mentions and shows a slide on GE F414 for AMCA.
As I had speculated GE Bangaluru design division, the Welch Center, is spear heading this effort to uprate the F414 by 10%. This arrangement should meet the DTTI requirements. Pearson, in his talk, does mention DTTI.
Re: AMCA News and Discussions
Found a slide from 2015, showing some of the stealth aspects of the AMCA under consideration (then?):
Re: AMCA News and Discussions
Infra red signature.
Heat shields around the engines?
Are they going to mix cold air with the exhaust? or an outer layer of cold air from the engine all around the exhaust like in the F-22?
I suppose the air intake and leading edges also heat up some
Heat shields around the engines?
Are they going to mix cold air with the exhaust? or an outer layer of cold air from the engine all around the exhaust like in the F-22?
I suppose the air intake and leading edges also heat up some
Re: AMCA News and Discussions
An article from 2012, that provides some insight about stealth expectations in Indian crafts.
India Explores Low-Observable Aircraft Technologies
India Explores Low-Observable Aircraft Technologies
Re: AMCA News and Discussions
6th gen has barely been defined. Although it will incorporate the manned/unmanned concept.
------
6th Generation Fighters are already taking shape
https://www.youtube.com/watch?v=zqah2_Avxf4
------
6th Generation Fighters are already taking shape
https://www.youtube.com/watch?v=zqah2_Avxf4
Re: AMCA News and Discussions
In what way?NRao wrote: Like I have stated, the AMCA is a rather mature project - already.
It still sounds very vague like the FGFA "smoke & mirrors" project.
I have not seen nor read any overall plan for the AMCA. Just some vague concepts of stealth, high speed on-board data buses, some vague ramblings about sensors..etc.
What part of the above cannot already be incorporated onto the LCA MK2? And what real advantage does it offer?
There has been no information on the AMCA's design released and no public discussion about what really this so called 5th gen plane design will offer. Some small group of individuals seem to have decided on what it should be without consulting stake holders.
Its not a good sign. I predict the AMCA project will end in chaos as mid way through they discover it offers nothing evolutionary let alone revolutionary as an aircraft.
After reading that terrible plan to make the LCA an unmanned fighter where little thought other than making the aircraft fly way points and drop its load has been given, the AMCA plan (more like lack of it) looks suspect.
Have a debate on the design of this plane BEFORE rushing ahead and making bad decisions.
Re: AMCA News and Discussions
Have been running into a bunch of old AWST articles on the AMCA. Posting some xtracts to provide some continuity (hopefully).
New Design For India's Advanced Medium Combat Aircraft
Feb 11, 2013.
New Design For India's Advanced Medium Combat Aircraft
Feb 11, 2013.
India has unveiled an updated design for its fifth-generation fighter concept, known as the Advanced Medium Combat Aircraft (AMCA).
Representations of the fighter have changed often in the last few years. But the scale 1:8 model of the concept displayed at last week’s Aero India 2013 show in Bengaluru is understood to be the final airframe and platform with which the program will proceed.
The twin-engine, stealthy, multirole fighter was first unveiled at the Aero India show in 2009, in the form of a metallic wind-tunnel model. At the show in 2011, a reshaped model saw its designers give it an F-22-like sensibility.
The final design, or at least the one the concept designers have put out this year, is strongly reminiscent of the Northrop Grumman YF-23 experimental fighter prototype that lost to the Lockheed-Martin led F-22 Raptor program in 1991.
A senior scientist at the AMCA directorate in Bengaluru says, “We have the fourth-generation Tejas on the one hand. But evolutionary technologies we are developing for the AMCA are on the cutting edge. They hope to be comparable with the best in the world. If we need a little help along the way in the interests of pragmatism, cost and time, we will study the feasibility of cooperation. But this ideally needs to be a fully Indian program. Sensitive stealth technologies will not be shared by foreign technology companies.”
A brief list of the ambitious technologies that India’s Aeronautical Development Agency (ADA) hopes to equip the AMCA with includes a panoramic active matrix cockpit, triplex fly-by-light electro-optic architecture, serpentine air intakes to suppress radar signature and an optic-fiber-based digital flight control computer.
Describing the AMCA as a “fifth-generation-plus” platform, DRDO chief Vijay Saraswat recently said, “Work on the AMCA will begin soon. This will involve identifying technologies and systems for the aircraft.”
Re: AMCA News and Discussions
AMCA layout from ADA's annual report 2015-2016
Re: AMCA News and Discussions
Weren't they working on conformal antennas for AMCA..?? Saw something in AI2017. From the ADA AR 2016:
Development of V/UHF Conformal Antenna for LCA MK2 done.
Under Ghatak program, mention of Conformal Antenna development work.
Development of V/UHF Conformal Antenna for LCA MK2 done.
Under Ghatak program, mention of Conformal Antenna development work.