Details of EL/M-2022A ordered for IN DORNIER 228 

 Features
Features
 - Optimized for detection of small targets in adverse sea conditions
 - Long range maritime surveillance, up to 200 NM (large targets up to horizon)
 - Range Profile, SAR and ISAR classification modes
 - Synthetic Aperture (SAR) and Doppler Beam Sharpening (DBS) Imaging for enhanced coastal surveillance
 - Moving Target Indication surveillance
 - Navigation and Weather mode
 - 
256 target Track-While-Scan (TWS), including IFF tracking 
 - High MTBF and extensive BIT
Options
 - All-Aspect Air Target Detection
 - Integrated with IFF Interrogator system
 - Fully-supported Operator?s Console
 - ISAR Classification Library
 - Strip SAR
 - Integrated with IFF Interrogator system
Display Features
 - Multiple sector/full scan control
 - Expand and Freeze
 - Classification tools, including target feature measurement (such as overall length of masts, superstructure)
 - Weather radar video output to cockpit
 - Main video standards supported
Antenna:
 - Planar array, vertically polarized
 - Ultra-low Sidelobe
 - 360 azimuth +10 to -30 tilt
 - Azimuth/elevation stabilized
 - Automatic/manual tilt control
 - Size and shape adaptable to available swept volume
Physical Characteristics
Power - 115V, 400Hz, 3ph, 2.3 kVA max 
MIL-STD-704 - Optional 28VDC inverter available
Weight - Approximately 90 - 100Kg depending on configuration (excluding Operator Console)
Cooling
 - Radar Processor and  Transmitter by forced-air
 - Antenna and Front-End by ambient air
Interfaces
 - MIL-STD-1553B data
 - ARINC 429 (NAV data option)
 - RS-343A, CCIR or RS-170 radar video
 - RS-170 weather radar video
 - Various discrete signals from the aircraft
 - Optional RS-422 radar slew command to an external FLIR turret system
 - ESM blanking output
Environmental
 - Designed to Military Standards
 - Qualified to MIL-E-5400 and MIL-STD-461
 - Temperature-Altitude: Sea level to 30,000 feet altitude over the temperature range of -20C to +55C
 - Vibration: Qualified to jet-fighter, turbo-prop, and helicopter standards
 - Sand and Dust, Salt-spray, and Humidity qualified
Maintainability
 - Continuous self-test and automatic failure alert during flight
 - Operational Readiness Test on Power-Up
 - Built-In-Test (BIT) for rapid turnaround and reliable fault location
 - Automatic Test Equipment available for higher echelon maintenance